SRAM BLEEDING EDGE PROCEDURE UPGRADE

Everything at this point feels perfect, BUT once I remove the bleed block and insert the pads and rotor, it's super soft and squishy. Compress the syringe one last time to pressurize the system. pump the handle a few times and then compress/release the lever syringe a few times to get more air bubbles out, and there is no longer any air bubbles coming out. Once have got all the air out of the system, I close the bleeding edge tool. I push/pull the lever syringe a few times to get all the air out of the system, while making sure to hold both syringes vertically so the air escapes to the handle of the syringe.

Pulled up the SRAM bleed guide on youtube. Fill lever syringe ¾ full of brake fluid and close syringe clamp. Add small amount of DOT 5.1 brake fluid to caliper syringe. Fit lever bleed tool and Bleeding Edge tool to syringes. Installed them, cable routed, everything is good. Fit bleed block to caliper and turn pad contact adjuster in opposite direction of arrow until it stops.

SRAM BLEEDING EDGE PROCEDURE UPGRADE

So i wanted to upgrade to Guide R, and got a good deal on a brand new kit. Position bike and caliper to minimize downward or. Remove Brake Pads First, remove the e-clip with your needle nose pliers. You can follow the same process for both the front. Remove Wheel For this How To, we will be bleeding the rear brake. This is a brandnew brake kit front and back, I replaced shimano deore brakes, which i have bled easily for the 4 years I owned them. 1 This bleeding procedure will work on SRAM drop bar and flat bar brakes that feature Bleeding Edge. How To: 15 Easy Steps to Bleeding SRAM MTB Hydraulic Brakes 1.

Sram bleeding edge procedure